SAR530T80DY-TCT Series Electric Motor Forward and Reverse Solid State Relay Widely Used In Motor Performer Control turn on or off the power being supplied to other devices, in a similar prevailing as a mechanical switch. However, instead of being switched by human interaction like a physical switch, SSRs are switched electronically. With SSRs, you can control highcurrent devices such as lights or appliances with low current signals, like a standard DCsignal from a Digital Output. Most SSRs will switch on with a voltage of 3V or higher.This makes them perfect for use with Phidget Interface Kits, or any device with a digital output. SSRs perform the same job as Mechanical Relays, but have the following advantages:

1. SSRs produce less electromagnetic interference than mechanical relays during operation. This is mostly due to the absence of a phenomenon called contact arcing only present in mechanical relays, where the physical contacts of the relay tend to spark internally while switching. The reduced interference can also be attributed to the fact that SSRs do not use electromagnets to switch.

2. The switch contacts of a mechanical relay will eventually wear down from arcing. An SSR will have a longer life because its internals are purely digital. Properly used, they will last for millions of cycles.

3. SSRs turn on and off faster than mechanical relays (≈1ms compared to ≈10ms).

4. SSRs are less susceptible to physical vibrations than mechanical relays.

5. Since the switch inside an SSR isn't a mechanical switch, it does not suffer from contact bounce and operatessilently.

Feature

● Zero crossing switch
● High dv/dt thyristor
● 10-30VDC Control Input
● Rated Current: 45-120A
● RC and MOV Protection
● Optional switching or analog control
● Serial communication, current detection, temperature detection

Product Description

The motor forward and reverse control module of the SAR series is specially designed for the control of three phase motor. The control circuit includes interlocking circuit, delay circuit, switching time between positive and reversal more than 20ms, avoiding the damage caused by the failure of the SCR to be completely disconnected and possible signal triggering. The module load current is 45-120A and the load voltage is 48-530VAC, And built-in RC absorption circuit, SCR with high dv/dt, widely used in a number of harsh applications, such as electric actuator control, including steam valves, flow control, interceptor valve actuator.

Model

SAR 530 T 10 D Y T

SAR Series Voltage 3 Phase Current DC Control Y: negative pole T: custom made

10—32VCD A: positive pole

K:Digital Input

Application

Three-phase motor forward and reverse control, such as electric actuator, transformer load voltage regulator, elevator control and other applications.

Dimensions

Temperature curve

Shipment and Packaging

Noker Electric is an automation & drive focused global company, providing global customers with control, display, drive and system solutions & other related products and services, under the support of its excellent electrical and electronic technology as well as strong control technical force.

Noker Electric a technocrat who have rich experience of more than 15 years in R&D, manufacturing and marketing of power electrical products, which are widely used in the fields of in packing, printing, textiles, plastic injection, elevator, machine tool, robot,wood cutting, stone carving, ceramic, glass, paper making industry, crane, fan & pump, new energy resources etc..

Main products:

Electric motor soft starter

Built-in bypass motor soft starter

Solid state soft starter

Vector frequency inverter

Thyristor assembly

Solid state relay

AC servo motor and drive

Programmable logic controller

Electric power meter

Pressure temperature transmitter

Digital temperature controller

Water pump controller

Metal clad and metal enclosed switchgear

Noker Electric contains R&D department, products manufacturing workshop, HV workshop, exhibition room, testing laboratory, quality control department, general office, sales departments, information office and etc, now we have more than 200 employees. We have obtained the ISO9001 quality system certification and all products strictly conform to the international IEC or Chinese state standards.

From the date of order placing, we usually need 5-8 working days to manufacturing. Located in Xi'an City, the provincial capital of China, Noker Electric also can provide OEM service according your customized. We are sincerely looking forward to cooperate with you from all the countries of the whole world. 

In order to provide more complete service and product for our customers internationally, meeting our customers expectations in the respect of time of delivery, solution support, after sales services and product customization support, Noker Electric has been searching for capable companies as our business partners, product agents and distributors, bringing good product quality and professional service to our clients globally. The superior quality and low cost of Noker Electric’s product are benefited from the mature and complete manufacturing system and the efficient logistic of China. Our talented and sufficient manpower, our rich engineering experiences, drives our product to be more complete and better in the respect of functions and performances.

Noker Electric, your professional electrical partner !